cystech electronics corp. spec. no. : c661n3 issued date : 2009.11.11 revised date : page no. : 1/6 BTB7150N3 cystek product specification high current pnp digital tran sistors (built-in resistors ) BTB7150N3 features ? built-in bias resistors enable the configuration of an inverter circu it without connecting external input resistors (see equi valent circuit). ? the bias resistors consist of thin -film resistors with complete isolat ion to allow negative biasing of the input. they also have the advantage of almost completely eliminating parasitic effects. ? only the on/off conditions need to be set for operation, making device design easy. ? pb-free & halogen-free package equivalent circuit outline BTB7150N3 r1=0.4k , r2=10 k in(b) : base out(c) : collector gnd(e) : emitter sot-23 absolute maximum ratings (ta=25 c) parameter symbol limits unit collector base breakdown voltage bv cbo -30 v collector emitter breakdown voltage bv ceo -30 v input voltage v in -20~+10 v i c -5 a collector current i cp -7 a power dissipation pd 225 mw junction temperature tj 150 c storage temperature tstg -55~+150 c
cystech electronics corp. spec. no. : c661n3 issued date : 2009.11.11 revised date : page no. : 2/6 BTB7150N3 cystek product specification electrical characteristics (ta=25 c) parameter symbol min. typ. max. unit test conditions collector base cutoff current i cbo - - -100 na v cb =-30v, i e =0a collector emitter cutoff current i ceo - - -100 na v ce =-30v, i b =0a emitter base cutoff current i ebo - - -0.6 ma v eb =-5v 120 - - - v ce =-2v, i c =-100ma 140 - - - v ce =-2v, i c =-1a dc current gain h fe 100 - - - v ce =-2v, i c =-4a - -0.25 -0.35 v i c =-1a, i b =-5ma - -0.34 -0.5 v i c =-2a, i b =-20ma collector emitter saturation voltage v ce(sat) - -0.53 -0.7 v i c =-3a, i b =-30ma input resistance r 1 280 400 520 - bias resistance r 2 7 10 13 k - transition frequency f t 100 - - mhz v ce =-10v, i e =-500ma, f=100mhz ordering information device package shipping BTB7150N3 sot-23 (pb-free & halogen-free package) 3000 pcs / tape & reel
cystech electronics corp. spec. no. : c661n3 issued date : 2009.11.11 revised date : page no. : 3/6 BTB7150N3 cystek product specification characteristic curves current gain vs collector current 10 100 1000 1 10 100 1000 10000 collector current---ic(ma) current gain---hfe vce=1v vce=2v vce=5v saturation voltage vs collector current 10 100 1000 10000 100 1000 10000 collector current---ic(ma) saturation voltage---(mv) vcesat@ic=100ib vcesat@ic=200ib saturation voltage vs collector current 10 100 1000 10 100 1000 10000 collector current---ic(ma) saturation voltage---(mv) ib=20ma vcesat ib=2ma ib=5ma ib=10ma on voltage vs collector current 100 1000 10000 100000 1 10 100 1000 10000 collector current---ic(ma) on voltage---(mv) vce=2v power derating curve 0 50 100 150 200 250 0 50 100 150 200 ambient temperature---ta() power dissipation---pd(w)
cystech electronics corp. spec. no. : c661n3 issued date : 2009.11.11 revised date : page no. : 4/6 BTB7150N3 cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c661n3 issued date : 2009.11.11 revised date : page no. : 5/6 BTB7150N3 cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of t he package, measured on the package body surface.
cystech electronics corp. spec. no. : c661n3 issued date : 2009.11.11 revised date : page no. : 6/6 BTB7150N3 cystek product specification sot-23 dimension *:typical inches h j k d a l g v c b 3 2 1 s style : pin 1.base 2.emitter 3.collector 3-lead sot-23 plastic surface mounted package cystek package code: n3 marking: an xx device code date code millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a 0.1102 0.1204 2.80 3.04 j 0.0034 0.0070 0.085 0.177 b 0.0472 0.0630 1.20 1.60 k 0.0128 0.0266 0.32 0.67 c 0.0335 0.0512 0.89 1.30 l 0.0335 0.0453 0.85 1.15 d 0.0118 0.0197 0.30 0.50 s 0.0830 0.1083 2.10 2.75 g 0.0669 0.0910 1.70 2.30 v 0.0098 0.0256 0.25 0.65 h 0.0005 0.0040 0.013 0.10 notes : 1.controlling dimension : millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material : ? lead : pure tin plated ? mold compound : epoxy resin family, flammability solid burning class:ul94v-0 important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cysrek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance .
|